WoW it was soaking wet today

Set off for a early morning ride this morning with my son Kyle. Although it was raining it didn't feel particularly cold. I decided to treat Kyle to a KFC so we headed up to Consett.

As you would expect the trails were pretty wet and muddy,we had a really enjoyable ride up to KFC. Once inside the restaurant we grabbed a couple of seats and a table near the entrance/exit so that we could keep an eye on our bikes and went over to order our meals. Mmmm delicious.

After we had finished we decided to set off back home, the weather had turned decidedly worse, the wind was getting up and it was lashing down. After we had both been in doors it was freezing to come back out into the cold rain and wind...Brrrrr!!!

On the way home we tried to get a few snaps, this proved to be rather difficult as my camera was keep getting soaked and here when I've actually looked at the images the majority are blurry (water on the lense I think).

Did manage to get a few as you can see, not the best quality.

As we neared home I decide to take a slight detour and we headed off down through South Moor park. It was really funny trying to take pics here as we were both so cold we couldn't operate the camera, hence no pictures.

Got in and soaked to the skin, so everything in the washer and try to get warm. It was kind of weird as just as we were coming over the playing field near the "pines" a we call it I said to Kyle I'm freezing everywhere except in my foot (The one I haven't got). Now I know this sounds like "well yeah obviously your foot or leg you don't have isn't going to be cold,as it's missing", but No I can actually still feel my amputated foot and it felt lovely and toasty warm,so bonus at least I wasn't all chilled through lol.

Like I say got in and I decided to checkout my images. I noticed my camera was feeling a little "gritty" on the scroll wheel, where the menu button is. So thought I'd take the camera apart and have a go at giving it a clean out. I got the camera apart no probs and was checking out the scroll wheel. I thought "Oh I'll just give it a little blow to dry it out, maybe remove some grit or debri" and the bloody wheel flew off and landed on the floor under my computer desk. I picked it up and went to pop it back in place and this is when I noticed the darn menu button wasn't there. So my dad, Kyle and myself have been on the better part of like 2 hours trying to find the missing button in my room, without success I may add. My dad reckons the Borrowers have nicked it the thieving little bastards. So now my camera is knackered.... awww great. Hopefully I can get it fixed, otherwise it's an expensive new year if I have to buy a camera of similar quality.

Not a bad day, so thought I'd head out

Got up this morning, had a quick look out my bedroom window and thought "hey it doesn't look like a bad day I think I'll head out for a ride".

Rummaged through my wardrobe and decided to go for my thick Endura legging (yes I only need one) and my thick Troy Lee shorts, thought if I did encounter any muddy/wet spots they would give me a bit more protection. Then it was just a case of popping on a few base layer tops and my Altura Jersey, finishing of with my RaceFace water proof jacket, oh and my Endura winter gloves and my trusty Buff. Love my Buff as it keeps me from getting ear and toothache when it's cold out.

Popped a couple of bananas and an apple in my Camelbak, filled up my water reservoir oh and slipped my camera in my bag. I was then good to go.

I wasn't entirely sure where I was heading so just decided to ride and see where I ended up. So it was left at the bottom of my street and I headed along towards the Farmer's Fields/trail. I had to stop at the bottom of the trail as the gate was closed and manoeuvre around a rather large frozen puddle. I thought when I first started my outing ever where was going to be pretty hard under foot...well tyre, but soon discovered I was in for a shall we say interesting ride up the farmers trail. You see as an amputee I can ride up most banks/hills or inclines pretty well, that is as long as I start off at the bottom and keep my momentum going until I reach the top. Stopping half way up an incline can be a bit of a nightmare. This is because it's real difficult to get the momentum to push off and get your prosthetic side round to keep the cycling action going. Anyhoo I was roughly half way up this trail when my back tyre just became so caked up with mud that I lost traction, inevitably I had to stop and put my good foot down. I then tried to find a spot on the trail where  I could push off and try and get going again. This is when I lost balance and err well fell over on my prosthetic side. Luckily there was a little bit of an embankment so I quickly put my hand out and managed to stop myself falling. The problem I now had was I couldn't get my good foot down as I was still sitting on my saddle and also there was a gulley on my good side so it made it even higher. So I found myself slightly stuck half on and half off my bike. I couldn't get my prosthetic foot out of the clip, obviously a false leg doesn't work in the same way as a normal one I couldn't just twist my foot to disengage lol. I'm just pleased no one was around to see me as it would have looked strange to see someone stationary on their bike yet hanging off to one side supporting themselves with one arm. Eventually I figured out how to get off the bike. I had 2 or 3 goes at pushing myself of the embankment and managed to get my good foot on the ground...Mission success lol and all this was only like quarter of a mile from home. Next plan of attack was push my bike up the trail, until I found a reasonably flat, un-muddy area and I was off.

I decided to head down onto the C2C and just kept going. I actually ended up at Roker, this is where I took a few pics of my bike up against the large "Nut". There are various sculptures and interesting bits and pieces on the way down to Sunderland.

 I was quite lucky I managed to get under the Wearmouth Rail bridge to continue on my way down to the Marina and the coast as it appeared there had been a large landslide and at some point the path had be cordoned off. Looking at the bank side which is vertical it looks very unsafe.

I saw this rather interesting ship at the dock, so thought I'd take a few snaps...

I rode from Roker to South Shields, up past the Port of Tyne and along to White Mare Pool. I then went under the bridge for the motor way and turned right and got myself on the road heading up through Springwell. By this time I had probably covered 30 odd miles and was gutted I was starting to run out of steam. Not making excuses, just I haven't been out riding for over 3 weeks as to be honest I haven't been feeling to well. But hey that's another story. I decided to move my Bartlett Tendon "Cam" to position one (1). This means there isn't quite as much resistance on the tendons and make it a bit easier. I managed to get up Springwell bank, have to admit got off and pushed for a bit at one point I just had no energy. Once into Wrekenton it was all downhill, until I came to Lamsley and then another bloody hill up towards Birtley.

I had rang my dad whilst I was on my way up Springwell bank, as I was worried I might not be able to make it home and thought I'd better give him a shout then, as my mobile phone battery was only on 9% charge. Stupid bloody phone always goes flat quick (new phone needed me thinks)

Just as I got to the top of the bank towards Birtley the cavalry arrived in the shape of my dad Ern. He's a legend. So we popped my bike on the car rack and then it was a quick ride home, where I could have a nice hot shower, something to eat and try and recharge my batteries, as well as my phones lol.

Although I didn't quite make it home under my own steam I'm still pretty chuffed, covered around 44 miles today, dam it only had to complete 6 or so more to get home. Never mind  not bad considering I'm going through a few health issues with this dam Lymphoma.

A short ride out...wow it's chilly

As I didn't manage to get out for a ride yesterday I thought I'd go for a short blast today. I didn't intend on going far so left my Camelbak and just took along my digi-camera and mobile (always carry my phone just in case).

WoW was it a bit brisk outside, soon got warmed up though and then as I heated up tried a few sprints out the saddle on my Bartlett Tendon. I had to be canny careful today as there was so much ice around I managed to slip n slide a few times but lucky never came a cropper today. I just love the sound of the crisp leaves beneath my tyres and the crunching of the ice as you go over frozen puddles lol.

Crunch!!!!

As I wasn't going far I thought I may as well take in at least one or 2  assents, it's to good to push yourself and get out of breath,means your working hard and helps keep your fitness up.Plus as I am running my BT on the number 2 position on both of the "cams" well it's a little more difficult as there is  slightly  more tension on my tendons. It will be interesting to see how much my muscles grow on my stump side whilst using this new BT and "cam".

Position 2 on the "Cam" see the like "grenade pin" lol

 I didn't get too many pics today, it's real difficult when your out on your todd. You set your camera To "auto" then try to do a drive by and capture it just right in time with the "Beep Beep Beep" of your camera. Never mind I did get a few which aren't total failures I guess.

Camera set to auto "just click dam you"

On my way home I decided to venture up South Moor bank (instead of taking a slightly easier flatter way home). I thought I'd change it up a bit and pop my bike into 1 gear higher and then ride one lamp-post to another seated, then one lamp-post to another out the saddle and pumping. I know to those who ride a bike normally, (by that I mean with 2 legs) it doesn't sound much, but as an above knee amputee riding up a hill out the saddle is quite a feat. I mean if it wasn't for this amazing knee I couldn't even ride out the saddle on the flat, never mind up an incline. So as I reached the top of the bank I was pretty chuffed and it was another gold star for the Bartlett Tendon. I mean yeah I could do it with the old BT, it was just a lot harder work. Brian has managed to move the technology along with the design of the "cam" and now the knee feels a lot more supportive the more the knee is flexed, this means you use less energy and instead of having to swap tendons out ie a choice between 2x softs or 2x hards or a soft/hard combo, you can now leave the 2x softs in and allow the "cams" to do the work. All you have to do is remove a simple pin on each side, pop the "cam" in one of the three pre-set positions depending on how much tension you would like going through each of the tenons and that's it your done. Oh and depending on what sporting activity your doing and if you require it you can also pump up the new RockShox Monarch RT3 and adjust the compression/rebound settings.

My Sandman

My first go on my new Bartlett Tendon, fitted with the "Cam" system...

Hi there...

Well this morning I got up, yeah rather late I mean come on I'm not used to these early starts and since getting my voluntary job at the hospital well I've been up around 7'ish every morning. So I thought I was entitled to a lie in.

I had planned to remove my old Bartlett Tendon knee and replace it with my new one, however my dad beat me to it as I got caught chatting to a friendly neighbour who was passing. My dad decided to sort the knee/socket indoors as it was a bit cold outside. So I was able to give him a bit of a hand and I did the final adjustments and tightening of the required bolts, aligned the knee and just made sure everything was as it should be. Oh I also swapped out the larger plastic bump stops (think that's what they are called. I'm not good with all the technical terms lol) and replaced these with the smaller ones Brian had supplied as I'm more accustomed to not having a slight flex in my knee. Basically if you have the larger stops in, it helps you bend the knee easier as it is already partly flexed.

It was then a case of changing my shorts and popping my SPD shoes on and going for a quick blast up and down our back street.

If you checkout my earlier photo's you can clearly see the different adjustment holes marked by dots on the side of each "cams"

I left the locking pins that go through the "cams" in position one (1 dot) to start with and had a ride up and down a few times. In terms of resistance I would probably say it's like running the 2 soft tendons with no pressure in the shock on the Original designed wheels. I did feel slightly more resistance the further I flexed the knee and that is the intended purpose of the "cams"

From there I decided to relocate both pins into the position two ( 2 dots) WoW now I could tell immediately the difference. At the top end of the stroke when cycling and the knee is not in full flexion there is minimal resistance, however when you go to flex the knee you can really feel the tendons becoming stiffer and a lot more resistance. From a mountain biker point of view this is brilliant as it means you can hang off the back of your seat and really use the tension in the tendons to help you take jumps, bumps and drops. I'm sure from other sporting perspectives the knee will be just as good.

So after my initial bit play up and down our back street I thought it would be a good idea to have a look out and decided to go over to some woods about 4 or 5 miles away. I cheated slightly as time was getting on so got my dad to drop me off in the car along with my Sandman Fat Bike and all my gear. I intended to get a little bit footag but was worried as the weather looked a bit bleak, it was dark and dull and ever so cold.

We arrived at the woods and like I say it was real cold, the trails where actually frozen in places and you could see the mist hanging and frost on the grass....brrrrrr!!!. Never mind I was on a mission to try out my new knee and have a bit of fun. Plus I had to do something otherwise I wouldn't have anything to write for you nice people, see your my motivation lol.

Anyhoo I got a little bit of ride footage, hope you like it. I will definitely be getting more, could do with better close ups of the knee. I actually found it hard to ride over in the woods as there was just so much thick deep mud. I could do with a new back tyre to be honest as my Surly Larry isn't gripping. Looks like I'll have to save for a Nate.

On the ride back home I was thinking about what I was going to write in my blog about the new Bartlett Tendon and for some reason Goldilocks sprang to mind. Let me explain... well as we all know Goldilocks apart from being a thief actually tried out all of the 3 bears bowls of porridge, until she found a one that was "Just Right" and in that respect the Bartlett Tendon with the new "cams" is exactly the same. You see each individual can adjust and tweak the knee unit to suit themselves and for whatever sport they intend on doing.

I'm very impressed with my first outing, even if I was freezing cold by the time I got in.

Me and the New BT with "Cams"

 

My Sandman

New Bartlett Tendon has arrived

Further to my last post saying I was awaiting the arrival of my new Bartlett Tendon (sporting prosthetic knee) well fantastic news it's arrived.

I managed to  take a few shots last night after I got it home from the UPS delivery office, sorry they aren't exactly mint images, just it was dark in our dinning room and for some reason my camera didn't want to focus on the unit on anything less than an 800 iso setting (hence the grainy appearance). Never mind it gives those of you interested in anything prosthetical (if that is even a word lol) or if you appreciate design, craftsmanship, engineering and the amount of hard work the designer Mr Brian Bartlett has put into this awesome prosthetic device.

So lets have a look at a few pics huh?

The Bartlett Tendon with new "cam" system

Notice there are 3 settings which can be chosen on either "Cam" this is so the tendons can work in different stages of tautness and effect just how much stiffness can be applied to the knee unit.

Still in the box, the Bartlett Tendon, with "Cam" system

Checkout the new RockShox Monarch RT3

Notice the 2 locking pins which go through the "Cams" and lock them in position

One of the locking pins removed from the "Cam"

The 2 locking pins in place through the "Cams"

Anyhoo prepare yourself for the next instalment when I will be fitting my new BT to my Pace Rehabilitation  provided socket  and getting some riding footage, along with a few photo's of me in action . Oh and also doing a little bit of a piece on how the knee works and feels to ride with.

Huge thanks goto 

LEFTSIDE INC

PACE REHABILITATION

For their on going support...

New Bartlett Tendon on it's way

Just over a month or so ago I returned my Bartlett Tendon to it's designer Brian Bartlett in the US. The knee required servicing and Brian wanted to checkout just how the knee was holding up in regards to wear and tear.

Brian now sponsors 5 people around the world, 2 of which are right here in the UK, that's Glyn and myself. We had fantastic news after the return of our knees and this was that Brian was going to further help out with our sponsorship and supply us with the new 2013 Bartlett Tendon complete with the newly designed "Cam" which the tendons run over. This design is still in trials at the moment and Brian has asked us to offer feedback to see how things feel compared with the original "wheeled system"

Both Glyn and myself are very excited about receiving our new high tech knees and can't wait to get in the saddle, or should that be out of it, as the Bartlett Tendon actually allows an above knee amputee to do this. And I don't mean just stand on the pedals, No you can actually ride out of the saddle, thanks to the unique design of the knee which incorporates artificial tendons.

I'm going to keep this post short as I fully intend to do a full write up along with ride pictures and hopefully some video of the new design.

It feels like Christmas has come early this year and I can't wait to unwrap my present.

For further information about the Bartlett Tendon please visit the below link.

Leftsideinc.com

Bartlett Tendon

Things aren't too bad

Just a quick update for those who read my blog about my current concerns relating to my Lymphoma.

Well today I visited Shotley Bridge hospital for my arranged appointment. I had my blood taken and waited 15 minutes or so before being called in to see the nurse who works on the cancer/haematology side of things. The team who I  see are always so friendly and supportive and today was no different. I was allowed to voice my concerns and it felt very nice to have someone listen then provide feedback in a positive manner.

The nurse then went on to give me an examination,basically the area's where you have lymph glands, so around my neck, under arms, tummy and groin area. I have a rather large node up in my left hand side groin area. The nurse said with the type of lymphoma I have,which is follicular lymph nodes will enlarge and present themselves. There was no abnormalities in my blood so apart from this stoopid lump I seem ok.

After the nurse examined me she asked the doctor to come and check me out so again my lump was examined and the doctor recommended I go for a precautionary CT scan. I'm not worried about the scan as I've had a couple previously, mind you I don't much care for the horrible stuff you have to drink before you have the scan, it tastes horrible. To me it tastes like really and I mean really diluted orange. Not quite water but definitely not pop.

So it's business as usual, continue with my new voluntary job and getting out as much as I can on my bike. Oh and I have arranged a time and date for my interview for the physio assistant's job at University Hospital Durham, so will see how that goes.