Tomorrow is Make or Break Time for Myrtle.

As many of you will know Myrtle is my beloved little 1965 VW Beetle. I have had her going on 3 years now and in that time only been out in her a handful of times. This has been due to a number of things. When I bought her I couldn't drive her due to my amputation, and Myrtle being an old school 4 speed manual gearbox. Plus upon buying Myrtle and getting her home she struggled to get over our large speed bumps, as she was on static suspension. Upon checking her suspension set up, well let's just say it was horrendous. Im then spent a fortune getting an Airlift Air Ride set up installed and for around 2 years, we were on constantly taking apart her suspension, measuring and then rebuilding back up. Myrtle just never drove right. It wasn't until the Airlift manifold stopped working that we discovered it had actually been broken from brand new.

 

Myrtle sitting pretty

Anyhoo long story short I got a new manifold and eventually got a semi auto clutch adaption fitted and I was able to take Myrtle out for a few drives. I love driving the wee car, I mean she is very underpowered, as she only has a 1200 cc engine, so I constantly felt like I was thrashing her, but the driving experience was great.

Semi Auto Clutch Motor Hides under the Back Seat

Recently Myrtle began having problems starting and ticking over. I stopped driving her, as every time I went to pull away her engine would bog down and stall. It takes a bit getting used to the semi auto clutch. 

I had the wee car for a service at LVH Engine and Resto's, the great guys who had fitted my Air Ride. When I went to pick her up, Paul the mechanic informed me that Myrtle had very low compression. Following Ern home as he drove Myrtle I could see every time he changed gear, puffs of blue smoke coming out of her exhausts, Not Good.

Oh and whilst Myrtle was sitting in our yard Ern came up with the bright idea of re-routing the brand new wiring harness and airlines inside of the heater channels so that they were hidden from inside of the car. This was okay as the heater channels are no longer used due to the Airbags being fitted and I couldn't run heater exchanges. So Ern began doing this job when I was at work. He had been on a couple of days re-routing the lines and wiring, then I came in from work one day to discover he had been hacking bits off Myrtle. He had gone and literally hacked off the end of the heater pipes where they come out from the inner sills. I can tell you I wasn't best pleased and we are still having heated arguments over it. I mean come on the car has survived 57 years, only for someone to come along with... well not sure what he used a chisel, electric saw or a grinder and starts butchering my wee car. It's a total mess. Ern's way of thinking "Don't worry no one will see it, it's under the back seat". If ever I wanted to put heat back into the car, it's now impossible, without major reconstruction.

  

Myrtle and her hacked heater channels

Poor Myrtle's been attacked

That is not the end of my woes with Myrtle. During the Summer I was on giving her a polish and the plastic vinyl body strips that someone had put over her roof guttering came away.The glue keeping them on had heated up under the sun and the sticky residue was melting all over. As the passenger side strip came off I discovered a huge split between the guttering and roof. Awwww man! It now has me totally stressed. I mean my plan was always to have Myrtle restored, but this looks like a major repair job.

Awww Man!!! 

Drivers side starting to crack Too!

With Myrtle standing out during winter other areas have started to appear, that need attention. She desperately needs a Resto job. I have so many new parts for her in the house. New Front Windscreen and deluxe seals, pop out rears. A new deck lid, rear wings and exhaust apron. New headlight surrounds, Chrome blade bumpers, under my bed, rear light surrounds and a new VW logo Badge whose price was extortionate. 

 

Rear wing rust

More rust coming through

Poor Myrtle

At the rear, deckled been catching this built up area.

I actually did a quick paint over on this bit, but its come back through

Tomorrow I am off to a place to see if they can sort Myrtle and at what price. Hence the title of my Blog "Make or Break Time for Myrtle".  

This little slot was where the custom quarter bumpers fitted.

Seat Belt mounts welded in

Doors Been Catching

You see it is not just bodywork and paint, after that I need to also save for a new engine and interior. So Mega Bucks. If it's good news tomorrow of Course I don't mind investing in the wee car. I always had my eye on a bigger engine, and I also had an idea for a custom interior.

So I guess I will know tomorrow, where I go from here.

 

Mini Adventure in Wee Myrtle my 65 Bug

 Decided to have a bit of a spontaneous adventure in Myrtle this morning, well I think it was morning as to be fair it could have been partly afternoon, my body clock is all over the shop.

I gathered some gear, my new GoPro Hero 9, my DSLR camera and I asked Ern, did he fancy a little jaunt out to which he replied " No you are alright, take your phone, just in case", no faith in the wee car Huh Ern?

Anyhoo Ern changed his mind, and we grabbed wor coats and the gear taking them to put in Myrtle. I then discovered I had completely forgot how to use my GoPro, so had to quickly pop back in the house, checkout a short YouTube vid for instructions, and then we were ready.

I started Myrtle up and let her warm up a little, she started first click. I checked her air ride pressures, just in case she had lost any air. I also checked to make sure the semi auto clutch was in auto mode, you can tell if it is as a little light lights up just under the throttle pedal.

 

I gently popped her into first gear, with a little revs and proceeded to stall her immediately. It kind of takes a bit getting used to this new fangled mod. I didn't want to rev the pods off Myrtle, as I was worried I would shoot out of our backyard and across the road, so I was trying to be gentle on the accelerator. After another couple of attempts, stalling her each time, it could be to do with her not being warmed up I managed to pull her out of our yard and headed for the first challenge, the bloody great big speed humps in our back lane. I hate these things, they are massive. Even with 90 psi in the front and 80 psi in the rear I can hear Myrtle scrape over the humps.

Clutch system is pretty unobtrusive

We managed to negotiate the humps and I turned onto Durham Road and headed up the bank. I managed to change gear quite smoothly, again it's just about figuring out how to drive the system. There are a few small things to iron out, and I have been in touch with Bewick Mobility, where I had the adaption fitted about improving the setup.

Oh whilst I remember for anyone wanting this kind of adaption it is quite expensive. I didn't know about a thing called Access to Work, it's a government scheme for people with disabilities. It's setup to help people with their jobs, so that can be as in my case getting too and from work, or it can be for other work related things, like training or equipment. It is just a handy thing to know, and it is easy to apply. You get an adviser who deals with your application, and it's pretty straight forward. In my case as I work part-time, 4 days per week I had to pay a certain amount towards the cost of my adaption, but it still saved me a lot, and to be fair I didn't mind, after all it has enabled me to drive my little car.

Myrtle looks tiny

Ern with Myrtle

Back to Bewick Mobility and the small problems I am encountering. It's things like loosing all drive at certain moments, this requires me to pop my hand over the gearstick sensor to re-engage the clutch, or like if I let off the accelerator as I am coming down a hill, again the car loses drive, so I have no engine braking. I have noticed when I approach lets say a roundabout, and I am braking either to negotiate it or slow down for other users that the system disengages/engages depends on how you look at it, and the car will just rev, instead of driving, so if you imagine as a normal driver, it's as if you are dipping your clutch and just coasting whilst in gear. The car uses a computer which is tuned to the car's rpm. The motor which operates the clutch is neatly hidden under Myrtles back seat. I think once she is setup, this will be a great bit of kit.

Ern looking over the moor, they were burning back the heather

We had a drive up to Wakerley and up on the moors, Myrtle whilst she certainly isn't fast, she is only a 1200 cc, she did pull up all the rather steep banks well and got us to our destination.

I shot a little video of me driving her, showing the gear change and when we got up on the moors took a few photos.

Myrtle VW Beetle 65

I am so paranoid about Myrtle not sitting level after all my problems last year, so ended up driving to a flat area in a housing estate on the way home and airing her up and down to see if she sat level on a fairly level'ish bit of ground. She appears to be sitting higher than both my dad and I recalled, however when you look under her, she is sitting on her pan so can't exactly go any lower...

Paranoid about her leaning

Love this wee car, so much still left to do

She is soooo cute

I drove Myrtle home on what I considered "My air ride settings" and sure enough when we got home she couldn't get over the bloody speed bumps, so I had to reverse and air her right up again.

Upon getting her home and back in our yard my dad said he was just going to dip her petrol tank to see how much petrol was in her, as the gauge hasn't moved in a while. Well it appears Myrtle runs on fresh air as the tank was bone dry, so much, so I don't know how we managed to get all the way back LoL

Tech to adapt a manual car

So as many of you will know I am after a classic Beetle. Thing is it's not as easy A.Finding a decent one, or one I like, and B. with me being an amputee I have the additional problem of being able to adapt a car so that I can drive it.

Awesome bit of kit

That said I upon doing a spot of research I have discovered firstly a company who has made and developed a Semi-Automatic Syncro clutch system, they are called Guidosimplex. The gentleman I spoke to named Gerard was most helpful and has put me in touch with a company here in the North East called Bewick Mobility.

Once I contacted Bewick Mobility, the gentleman there named Matthew couldn't do enough for me and was spot on in offering advice and really made me feel special in his email responses, something I think is lost sometimes these days, when there is no face to face contact.

Being an amputee or indeed having any disability, always comes at a premium, so I am looking at around the £3000 mark to have this piece of tech fitted to a potential car.

Matthew did suggest I look into the Department for Work and Pensions (DWP) - 

Access to Work Scheme. I am in two minds as to try this route, as it involves more paperwork and well like a lot of people out there I do not fully trust the government's agencies. They may deny me in the hope my leg is going to miraculously grow back one day.

And so my search goes on for the next love of my life. I will be sure to blog a lot more with pictures of my next ride, and of course, the clutch adaption, as I think those that follow my blog may be interested and hopefully it is of some use if you would like to follow the same route.