Tomorrow is Make or Break Time for Myrtle.

As many of you will know Myrtle is my beloved little 1965 VW Beetle. I have had her going on 3 years now and in that time only been out in her a handful of times. This has been due to a number of things. When I bought her I couldn't drive her due to my amputation, and Myrtle being an old school 4 speed manual gearbox. Plus upon buying Myrtle and getting her home she struggled to get over our large speed bumps, as she was on static suspension. Upon checking her suspension set up, well let's just say it was horrendous. Im then spent a fortune getting an Airlift Air Ride set up installed and for around 2 years, we were on constantly taking apart her suspension, measuring and then rebuilding back up. Myrtle just never drove right. It wasn't until the Airlift manifold stopped working that we discovered it had actually been broken from brand new.

 

Myrtle sitting pretty

Anyhoo long story short I got a new manifold and eventually got a semi auto clutch adaption fitted and I was able to take Myrtle out for a few drives. I love driving the wee car, I mean she is very underpowered, as she only has a 1200 cc engine, so I constantly felt like I was thrashing her, but the driving experience was great.

Semi Auto Clutch Motor Hides under the Back Seat

Recently Myrtle began having problems starting and ticking over. I stopped driving her, as every time I went to pull away her engine would bog down and stall. It takes a bit getting used to the semi auto clutch. 

I had the wee car for a service at LVH Engine and Resto's, the great guys who had fitted my Air Ride. When I went to pick her up, Paul the mechanic informed me that Myrtle had very low compression. Following Ern home as he drove Myrtle I could see every time he changed gear, puffs of blue smoke coming out of her exhausts, Not Good.

Oh and whilst Myrtle was sitting in our yard Ern came up with the bright idea of re-routing the brand new wiring harness and airlines inside of the heater channels so that they were hidden from inside of the car. This was okay as the heater channels are no longer used due to the Airbags being fitted and I couldn't run heater exchanges. So Ern began doing this job when I was at work. He had been on a couple of days re-routing the lines and wiring, then I came in from work one day to discover he had been hacking bits off Myrtle. He had gone and literally hacked off the end of the heater pipes where they come out from the inner sills. I can tell you I wasn't best pleased and we are still having heated arguments over it. I mean come on the car has survived 57 years, only for someone to come along with... well not sure what he used a chisel, electric saw or a grinder and starts butchering my wee car. It's a total mess. Ern's way of thinking "Don't worry no one will see it, it's under the back seat". If ever I wanted to put heat back into the car, it's now impossible, without major reconstruction.

  

Myrtle and her hacked heater channels

Poor Myrtle's been attacked

That is not the end of my woes with Myrtle. During the Summer I was on giving her a polish and the plastic vinyl body strips that someone had put over her roof guttering came away.The glue keeping them on had heated up under the sun and the sticky residue was melting all over. As the passenger side strip came off I discovered a huge split between the guttering and roof. Awwww man! It now has me totally stressed. I mean my plan was always to have Myrtle restored, but this looks like a major repair job.

Awww Man!!! 

Drivers side starting to crack Too!

With Myrtle standing out during winter other areas have started to appear, that need attention. She desperately needs a Resto job. I have so many new parts for her in the house. New Front Windscreen and deluxe seals, pop out rears. A new deck lid, rear wings and exhaust apron. New headlight surrounds, Chrome blade bumpers, under my bed, rear light surrounds and a new VW logo Badge whose price was extortionate. 

 

Rear wing rust

More rust coming through

Poor Myrtle

At the rear, deckled been catching this built up area.

I actually did a quick paint over on this bit, but its come back through

Tomorrow I am off to a place to see if they can sort Myrtle and at what price. Hence the title of my Blog "Make or Break Time for Myrtle".  

This little slot was where the custom quarter bumpers fitted.

Seat Belt mounts welded in

Doors Been Catching

You see it is not just bodywork and paint, after that I need to also save for a new engine and interior. So Mega Bucks. If it's good news tomorrow of Course I don't mind investing in the wee car. I always had my eye on a bigger engine, and I also had an idea for a custom interior.

So I guess I will know tomorrow, where I go from here.

 

Picking up Bits and Pieces

Following on from getting Myrtle back from LVH Engine and Restos and being contacted by Leanne from Limebug as she saw some of the pictures I had posted up on social media. It soon became apparent that something was not quite right with my little bug.

Washed, dried then put under a cover

I sent a few pictures of the underneath of Myrtle to Leanne and she reliably informed me that the "relocators" I had not only had to be bolted in place but also welded to the arms. Apparently, there are some new Limebug versions that just bolt in place. Leanne also went on to say fitting the "relocators" it was an easy mistake to fit them around the wrong way. I'm no mechanic and as far as I am aware there were no instructions so I couldn't say if this was the case when I looked

I immediately contacted Paul over at LVH and he informed me not to worry he would sort it. In fact, now that the new trailing arms have arrived from Cage66 fabrications I know once they are fitted to Myrtle she will be sitting pretty, and I will not require the other damper relocators.

Extended Arms from Cage66fabriactions, all painted gloss black

So after getting Mrytle back all I have done is wash her, dried her off and put her under a cover, awaiting a time Paul can fit her in to get some more work done on her. The short break gives me a little time to save up some more cash, man this is proving to be quite an expensive hobby. I have just spent yet another £800 or so quid on various bits and bobs for her this last week.

This includes a new Powerlite 75 amp alternator. The old dynamo just couldn't cut it when coming to power the dual compressors for the Air Ride system. I kept getting a low voltage warning on my mobile when activating the ride height. I have also had to buy a new fan shroud to take the alternator. Whilst I was on I thought I may as well "Bling" Myrtle up a little in the engine bay so purchased an MST Black billet Serpentine pulley, "Dizzy" stand and fuel pump block off, all from Limebug. Also after getting some good advice from Max Edwards over at Eva Resto, I opted for a Facet electric fuel pump and a Filter King. I got a complete setup, including fittings and line from Machine7. Max had informed me that the pump was best fitted under the tank and upon visiting his website I discovered he had a ready-made bracket, that looks spot on, so I invested in one of those, powder-coated of course.

A few bits and bobs

Facet Fuel Pump and Filter King Ooh and a grab handle and sun visors

Powerlite 75 amp alternator and some MST Billet Kit

Since purchasing Mrytle I have had an idea of how I would like her to be, she will be by no means a "purists" car, however, she will remain classic looking. I think her Mango Green colour adds to this. Slowly I have been buying the odd bits and bobs, quite a bit of it for when she is in the final stages of completion. So things like replica Porsche 456 headlight guards, or the Limebug parcel rail. Stuff for the car is quite expensive for instance £38 just for genuine interior light and as yet I still have to find a hole to put it in without wrecking my headlining, saying which long term I will probably have all of the interior done. I already have ideas and a plan in my mind for this, so have been thinking of colours. Somewhere it will involve red, so I have purchased a full set of seatbelts, 3 points for the front where Paul welded the extra mounts in my lower B-pillars and 2 points in the rear, not very often I have people in the back anyhoo.

Red belts and the Eva Resto Fuel Pump Bracket + a rather expensive interior light

The DWP has been in touch just yesterday asking me to provide quotes and a driving assessment report. I have tried explaining I cannot go for an assessment as there are no vehicles currently in the UK employing this type of semi-auto Syncro clutch. I do have one quote and I am awaiting another, so fingers crossed when it comes and they take a look at it they will be willing to offer help support me with my Access to Work application. I will let you know how I get on with that.

I love my little Myrtle

What an exciting morning, the day had come to be reunited with my little 65 Bug Myrtle. The guys over at LVH Engine and Resto, Paul and Rob have been hard at work fettling a few things for me. The biggest of which was Myrtle's suspension.

Myrtle

As mentioned in a previous blog entry I had purchased a full Limebug Deluxe Swing Axle kit, which included a 4" narrowed beam and 3p Airlift management. Other jobs included putting in extra seat belt mounts at the bottom of the B pillars, popping in a new passenger-side door seal, sorting an engine oil leak Oh and fitting a very nice looking and sounding Vintage Speed Sports Muffler, alongside a few other bits n bobs.

Vintage Speed Sports Muffler

Vintage Speed Exhaust sounds Sweet

The new Air Ride system works a lot better than the old set up, however, does need a bit of fine-tuning. Once I get to grips with the new-fangled Bluetooth set-up and what pressures to run, Myrtle should ride pretty sweet. 

How to get her lower?

Whilst I can tinker on with cars I am by no means a mechanic, so not sure of the exact set-up of Myrtle. I was expecting her to actually sit further on the floor as she has dropped spindles and Atom rear spring plates.

Twin Viair compressors

I am now awaiting a complete set of torsion arms arriving from the US from Cage66 Fabrication. These arms should help the front wheels clear the inner headlight buckets and also help with positioning the front wheels centrally when Myrtle is dropped.

Lengthened Arms

I have chucked a small fortune at Myrtle so far and as yet she is way off even being half done. Now time to save up some more cash and maybe get a few little jobs done before next year. She is definitely a work in progress.

Ern still driving Myrtle as I can't

  Oh almost forgot upon our drive back from LVH, Ern and I called into Bewick Mobility. They have a very friendly team and it was good to eventually meet up with Matthew Burns who I had been chatting to and emailing back and forth about the required clutch conversion to Myrtle. One of Bewicks technicians checked Myrtle over whilst she was up on the ramp and we discussed various options for to have a semi-auto clutch fitted. 

Heading up on-ramp

   Just hope I get some assistance from the DWP and the Access to Work scheme, as the cost of the job will be around £4k. Being disabled sure does come with more penalties than just the disability itself. Never mind when you have a passion, there is always away, and it always feels good to bring something to fruition with your hard-earned.