A few more additions for the Abarth 124 Spider

 A couple of weeks ago I had managed to save up a few more quid, so took my wee Abarth 124 Spider down to see the Exhaust Doctor based at Shiremoor. 

Abarth 124 Spider

After doing some research on the Spider I had learned that the standard Crosspipe was quite restrictive, plus as my car is an automatic, no one offered a larger bore centre pipe.

Exhaust Doctor Abarth 124 Spider

I have already fitted a Ragazzon valved rear backbox, and although I like the look of the exhaust, the sound to me is just not as good as the standard Record Monza. My Record Monza's valve was stuck in the fully open position, and sounded a bit more "raspy". Anyhoo  I was hoping putting on a larger Crosspipe and centre pipe may help my car sound a bit better.

I don't really want to change the Cat to a race one, as this involves remapping the car, something I intended to do a bit later on, but not just yet.

So the new sound of the car, well it's better than it was, a little louder and a deeper tone. I suppose the good thing is the car can be driven and doesn't have a constant "Boom", unlike Grandma my VW Beetle GSR, which constantly drones and becomes creative on long journeys. Well I imagine it would in a long journey, what did I know, having just had "Grandma" for her MOT, she had only done 206 mikes last year.

Next on the mods list was a new set of EBC dimpled rotors and Green Stuff pads. I had been waiting what seemed like ages for EBC to get these in stock. I was chuffed to bits that I checked my Blue light card, as I got £75 off, which was a canny saving.

EBC discs & pads

My dad did most of the work removing and installing the new components. I'm currently off work on the sick yet again, due to my prosthetic limb not fitting. I've been trying to wear my new socket to do everyday things, but man the socket is really uncomfortable, causing me a fatigue like pain, and also causing phantom pain. It's like having a turnaquet in my stump each time I wear my leg.

Following fitting the new brakes, my dad and I tested my new OZ alloys, using the 5 mm spacers I bought, in order to clear the Brembo calipers in the front.

Once I get a bit more money saved and the weather improves I'll get the wee car back along to Performance 28 to get the coilover suspension fitted that has been sitting in a box at the bottom of our stairs.

Grandma ... My What Big Brakes You Have !

Well we have finally got around to fitting the bigger brake mod to Grandma, my 2013 Volkswagen Beetle GSR, which happens to be #240 of a production run of 3500 worldwide. Of those 3500 cars produced only 100 were brought to the UK. Of that 100, there were 70 Yellow and Black's and only 30 Platinum Grey and Blacks, so Grandma I suppose is quite a rare car, plus Volkswagen are no longer making the Beetle, so she may become a bit of a collector's car.

Grandma is now 9 years old, approaching ten, and she is in canny good nick. Stone chips are my biggest annoyance with her, but hey, show me a car without the odd bit of road rash after 10 years. She still turns a few heads, and I think quite a few people get a surprise at just how pokey she is. When I bought her, she was remapped, with a Revo stage 1, and pushing out 264 Bhp. I then got her remapped to a stage 2, along with the Race Cat and DSG gearbox map, so she is now pushing out 290.6 Bhp. Grandma is also running a Revo cold air intake and a Miltek unresonated Cat back exhaust, which sounds pretty good, however can get on your tits when travelling between 50'ish to 60'ish as it drones, so much so at times it makes my ears go funny. The DSG mod is quite fun as when you boot Grandma she has a sort of fart when chaging gears in sport mode Lol.

Anyhoo moving along I will now give you a run down of the brake mod with as much detail as I can, who knows it may help someone out there if, like me, you run into a few teething problems with mixing and matching bits of gear. I will write a complete list at the end for reference purposes, so you can skip to there if you don't want to read my blog... Shame on you, Lol.

OK so the 2013 VW Beetle I think is based on the Mk 6 Golf chassis. I am sure this is correct as I recall the Miltek Cat back system as being off a Mk 6 Golf and also the Revo 200 cell Race Cat from a Golf Mk 6 fitted when i had it fitted down at BTG Performance. Following much research and still being a little unsure, of what exactly would fit, I just decided to bite the bullet and purchase a pair of MK 7 Golf R front calipers, which I got from Flea Bay. They came complete with the carriers and the R badge side plates. I opted for all black to go with my stealth theme.

Grandma about to be elevated

Had her 4 years now and still love her