Just catching up a little.
On the Friday afternoon, just gone the 18th, Ern had popped out, so I decided to have a go at installing the new MOA 430 Ultimate Air Ride Gold top front shocks that I had purchased from Limebug. I will get back to these in a moment.
Wee Mrtle my 65 Bug
You see I have been having real problems airing my car up with the current air shocks and Air Lift 3p setup. After talking things through with Limebug, we came to the conclusion that as I have a set of Cage66 Fabrication extended trailing arms, that the ordinary air shocks that I bought in my deluxe kit from Limebug just were not powerful enough to get my car where I needed it.
MOA 430 Ultimate Air Ride Gold top front shocks
My dad and I have been working on and off with Myrtle for over a year, doing various jobs, however we have always come back to the suspension. We have measured, re-measured, tweaked and adjusted, paid a small fortune for all the best quality parts and yet Myrtle has always just driven terrible.
Recently my dad and I fitted a complete front brake disc kit using CB Performance equipment, this included new 2 1/2 inch dropped spindles and required us to remove the king pins and re-shim Myrtle up. Following all this work her tracking was way off, so much so that as we attempted to get Myrtle driveable to be able to take her up to the General Garage at Anfield Plain, in the short space of about a mile, a mile and a half Myrtle's front passenger tyre was pretty much destroyed on the short trip up, cracking and splitting the tyre near the sidewall. Just pleased I didn't have my new alloys and tyres on for the trip up.
Once up at the General Garage, Ash directed my dad onto the garage lift and Ash and one of his colleagues fitted the laser alignment gizmo's to all four wheels. We could see immediately that the front passenger side wheel was way out of wack, it was so bad the lasers couldn't even line up. Ash lifted the car up and got under to adjust the track rod ends and once he used his machine to set up Myrtle she was looking much more aligned. Ash lowered the lift after tightening everything up and m dad reversed Myrtle off and then took her for a quick blast.
When Ern returned he said Myrtle now drove 100% better and that he had even had her up to 60mph along the bypass, without her wanting to wander all over the road. This was such a relief and for the £20 quid Ash charged well worth the money.
Ern in Myrtle at the General Garage 
After having Tracking done
Myrtle's camber is still slightly out, but it's miniscule, being - 1.49 degrees, so rather than mess about with the shims again I think I am just going to leave her alone.
Now then getting back to the new MOA shocks. Like I mentioned earlier Ern had popped out. I was bored so thought I may as well have a go at fitting the shocks myself, it's a simple enough job really.
Our yard is block paved, however it has a slight ramped angle to it. This just happened to be where Myrtle's front beam was sitting over. I got the trolley jack out and placed a piece of wood on the pad of the jack, thinking this would aid in giving the jack some purchase on the protective skid plate that is attached to the narrowed beam. I had just jacked the car up and was measuring up to see if the axle stands would go under and realised the axle stands were going to be sitting right on the lip of the ramped block paving, so I went to jack the car up just a tad more so that I could put the stands under the underside of the floor pan.
That's when Myrtle slipped off and wood block and then the pad of the jack shot up under the underside of Myrtle, just where the spare wheel sits. "Awww! Fuck". It took me ages to try and prise the wood and the jack out as they had jammed right up between the skid plate and beam. I eventually got them out and noticed there was now a huge upward dent in the spare wheel area.
What a struggle I had removing the spare wheel as it was now jammed. Eventually I managed to get it out and sure enough when looking under the bonnet towards the front of the well, the underside had a huge bowed dent. I decided to leave this for now and get my dads advice on how to go about fixing the area. Thoughts running through my head of "Awwww! Man it's like one step forward ten back with this car".
Cracking on with removing the old front air shocks and then replacing them with the new MOA's, it didn't take too long at all. Everything when checked looked good and the new shocks although slightly larger appear to clear everything.
When my dad returned he had a look at the dent I had caused and with a little gentle persuasion he was able to knock the ding out using a piece of wood, a mash hammer and a dolly. The paint had cracked, so I rubbed the area down, masked it off and then primed and repainted the area using a rattle can. It's not perfect, but hey Myrtle is no show winner. I just want her to a standard that looks presentable and something that is reliable. She will be used for pure pleasure and to hopefully once complete bring both my dad and I miles of smiles.
A quick test of the new MOA front shocks and it immediately became clear that they are more up to the job. You can now see Myrtle start to raise her front end at around 30 to 50 psi, and she comes up a lot quicker too. I am still playing around with what pressures to use, you see where we live we have speed humps that are like small mountains. I always feel I have got Myrtle up to a good ride height and then as she is driven over the humps she makes the most awful scraping sound as she catches somewhere or another. The humps are really bad I have already had 3 exhausts on my little Smart car due to them.
Kyle with my cars
 |
| I love this wee car |
On Saturday, the 19th Ern & Kyle took Myrtle for a little test drive, whilst I followed in Grandma my new Shape Beetle GSR. We only went over to Burnhope and the little picnic area overlooking the valley. Just wanted to see if Myrtle was driving ok and how the suspension felt. As, yet I still cannot drive Myrtle myself due to her not having the semi-auto clutch adaption fitted. With being an above knee amputee it certainly does make things more difficult and also comes at a premium.
Wee Myrtle with Grandma
Ern informed me that Myrtle is now driving great. I could pretty much see to be honest as she was straight on the road and not pulling or leaning to one side, plus my dad was going that much quicker.
I am now looking forward to getting the clutch mod done in October and once that is done we can start working on other areas of Myrtle, once I have saved up some more money of course, as boy this wee car has been somewhat of a money pit.
No comments:
Post a Comment