Nothing is ever straight forward!

After purchasing Myrtle my classic 1965 Volkswagen Beetle, a few weeks ago, both Ern and I have been "jobbing on" and sorting out things that either the old girl needs doing, or things that make her that much more comfortable to live with...Oh and just little personal touches, like my Dubtastic Custom Mini Surfboard keyring. The Joker is also there on my keys.

The Joker

Custome Dubtastic Design

So far as mentioned in an earlier blog I have replaced all of Myrtle's locks and we have tried and tried to get the wiper motor to sit in it's parked position, however, this has proven to be one of those occasions where we have had to admit defeat. I am now quite happy to have the whole wiper motor and switch put back in the car and just treat the operation of using the wipers and turning them off when they are in a suitable position as one of Myrtle's quirks, a part of her personality lets say.

Speaking of wipers I had ordered 2 new wiper arms along with blades, period correct. Man the hours I have spent trawling the interweb to try and discover what is period correct. Anyhoo upon fitting one of the wiper arms, the place where the grub screw goes in just exploded. Have to say Just Kampers the place where I got the arms from were superb when I contacted them telling them of my problem, as they agreed to get another one out to me at no extra cost. Can't ask for any more than that.

Oh Dear

Moving on that is not where our frustration ends. After discovering Myrtle did not have any heat exchanges I ordered a Deluxe kit. This came with everything we needed to fit new heat exchanges. I was also very excited as I had purchased a new Vintage Speed Stainless Steel Sports Muffler...My she looked fine. Imagine our horror when we went to fit her up and she just would not go near. There were a few explanatives from both Ern and I. Ern got his tape measure out and upon measuring from centre to centre the Vintage Speed Muffler was 610mm, whilst the Heat Exchange pipe was only 595mm. Needless to say, I have had to send the Vintage Speed Muffler back to VW Heritage, which has been quite the chore. Further to that apparently the exhaust I need is not stocked and will take anywhere from a month to 6 weeks, good job I am not going anywhere in Myrtle soon. Oh and whilst I am on about Vintage Speed I am also wanting one of their Quickshift gear sticks, however, no one appears to have them in stock. I can't see the Guidosimplex semi-auto clutch set up fitting on my current Gene Berg set-up.

 




 

Will have to order up another one and then wait.

The style I am looking at, will have to wait and see how the Guidosimplex auto clutch fits and works.

 Whilst lying under Myrtle we have also discovered an oil leak, so it is on the list of "things to do"

Oil Leak

Ok continuing with minor problems and patience being tested. The Heater Tubes I ordered, upon going to fit them yesteday, guess what? Yep, they did not fit. So they are now bundled up and awaiting confirmation to get sent back and we have had to do more measuring and more research to find a pair that will fit, and I have had to order these. Now awaiting delivery.

Dam it they don't fit

Oh, and I am not finished there. In order to get heating and demister to work correctly, we have encountered another problem. The heater tubes/pipes running from the sill and up inside the inner wing, where it's practically impossible to get to without cutting a huge piece out of the car, well they are missing. Both Ern and I tried in vain yesterday to get a piece of the flexi hose onto the bottom of the sill mount. Ern has made a hole that was originally there, a bit larger, it's on the inside of the inner footwell, and we have been trying to twist the pipe onto the mount without success. I have now ordered some slightly larger tubing "Original stuff" and hopefully we will have more success with this. I am gutted as when we have removed the carpets from the footwell is has taken some of the paint off the inside of Myrtle. I mean once the carpets are back in place you will never see it, it's more to do with my "OCD" LoL. I am actually fancying new carpets, something custom, as the car is never going to be a  totally "Original 65".

OK have to stop looking now it's making me anxious

A few other various shots of Myrtle and bits and bobs we are on with

New Door check strap and light switch on order

Apparently, you can no longer get these pipes anymore

I will get interior sorted at a later date when I have more Wonga

Awaiting a new horn push kit

 Some of the engine "tins" removed to gain access to exhaust and heat exchange. I also ordered the wrong seal for the "Popes Nose" Number plate light, however just as well as Myrtle did not have a seal on the small light anyhoo. The "Popes Nose" is from an earlier year Bug, a 64 I am guessing.

Some of Engine Tin removed

Got a seal to pop on here, just going to sort some new studs for lens

Trust Haynes Manual

 A Few shots of Under Myrtle

New Heat Exchange

Looking a bit stripped out, probably best left like this until I get the seatbelt mounts fitted. Heat cables on one side routed through and fixed to the heat exchange. Also awaiting a nice new Handbrake boot.

 

So today and over the course of next week, expecting a few parcels to arrive. Once I get reimbursed for my Vintage Speed Muffler I will order up, what I  hope is the correct version.

Almost forgot I have no interior light, so have ordered up door switches and a top end Wolfsburg West interior light. Only problem being I do not know exactly where it fits, and I am slightly worried about my roof headlining. I may have to get it sorted by a professional along with my throttle pedal, which at the moment is a roller throttle pedal, which is a little cumbersome for me. Oh and I still have to get the seatbelt mounts sorted as there are none at the bottom of the B pillar. I have checked and checked again...Nope, none there.